|
–
|
The CUSTO LAN RL Can drive 8 relays by RS485 or Ethernet network. Can also be used as an Ethernet/Media Bus Control gateway (XMonopro, Multicustom &Minimono).
|
| – | Built–in Power over Ethernet (PoE: IEEE 802.3af) capabilities.
|
| – | CUSTO LAN RL can be powered through Ethernet cable CAT5. The second solution to power CUSTO LAN RL is to use a standard external power supply 12VDC.
|
| – | Ports: 1 Ethernet RJ 45
2x 12V power supply on detachable terminal blocks,
2 RS485 on detachable terminal blocks
RS 485 port for communication with Vimaty/ Padmaty touch panels and XMonopro, Multicustom or Minimono controllers aswell as Custo Series.
|
| – | The 12V output can power an other CUSTO module or a 12V external device (Amp depends of the main power unit).
|
| – | Up to 16 CUSTO LAN RL modules can be used on the RS 485 Media Bus Control (address set by dipswitches).
|
| – | The operating system can be directly updated through Ethernet.
|
FRENCH VERSION
