|
–
|
CUSTO LAN EIB can drive EIB–KNX or X10 devices by MBC Bus or Ethernet network. Can also be used as an Ethernet/Media Bus Control gateway (XMonopro, Multicustom & Minimono).
|
| – | EIB–KNX is a bus generally used into the electric closet to simplify the communication between the different electric commands.
|
| – | Thanks to CUSTO LAN EIB you can control every electrical system of a house (lighting, dimmers, heater, security, ...).
|
| – | So you can send and receive commands to all devices with EIB compatibility (Hager, Legrand, ABB, Siemens, Berker, Jung, Siedle, ...).
|
| – | X10 is a power line protocol to drive X10 devices (lamps, electric plug, ...). Mono X10 is an optionnal interface to link the CUSTO LAN EIB to 230/110 power line.
|
| – | Built–in Power over Ethernet (PoE: IEEE 802.3af) capabilities. CUSTO LAN EIB can be powered through Ethernet cable CAT5. The second solution to power CUSTO LAN EIB is to use a standard external power supply 12VDC.
|
| – | Ports: 1 Ethernet RJ 45, 2x 12V power supply on detachable terminal blocks, 2x RS485 on detachable terminal blocks MBC Bus port for communication with Vimaty / Padmaty touch panels and XMonopro, Multicustom or Minimono controllers as well as Custo Series.
|
| – | Up to 16 CUSTO LAN EIB modules can be used on the MBC Bus Media Bus Control (address set by dipswitches).
|
| – | The operating system can be directly updated through Ethernet.
|
FRENCH VERSION
