VCAS active Speaker it´s build in  Stereo 2X15 Watts power amplifier and a wide angle Infra Red  receiver  that can drive through a wireless IR remote control all the function like ON/OFF , source selection , volume , balance , treble , bass , mute, the IR receiver have also ‘´Pass through ‘´ function that  provide the possibility to drive the command  function like CD or Radio   (play : forward : skip...) .  This eliminates the need for a wall control keypad and therefore makes a Multi-Room System even easier to install, particularly in a \\\´retro-fit\\\´ situation, ideal for shops, home, conference room and so one.
VCAS amplifier drives both, itself and a passive loudspeaker like VCSS-6504, A pre-amp output is even included for connection to an active sub-woofer or separately powered pair of speakers like VCAS0020 if desired.  

With a low profile grille which may be painted.

CAS active Speakers need external power unit PSW2440, Connecting Audio Input block SSI E1012AE, ON/OFF , Remote can be do by VITY automation remote control WZB 35- VIMATY 70ZR or RMC 117 IR remote control .

When settings are being adjusted, small confirmation beeps are issued so the user knows that adjustments are being made.

For more information about the application consult our AUDIO VIDEO MULTIROMM  Brochure

Specifications:

Built amplifier & IR using customized remote control

No keypad required

Control only over IR remote

IR ‘´Pass through´´ 35-40 Khz , 54- 56 Khz Modulation.

2X15 Watts Stereo power amplifier Built in .

2 Way Coaxial unit tweeter 2.54 cm woofer 16.5cm

Crossover frequency: 5 kHz
Nominal impedance: 4 ohms
Power handling: 15-60 Watt
Frequency response: 60 Hz - 20 kHz +/- 3db
Sensitivity: 88 dB SPL @ 1Watt/1 meter

Mounting depth required (Min): 85 mm

Size :  Ø : 240 mm D : 85 mm

Cut-out dimensions: 207 mm

Recommended back air volume: 20 liters
Weight: 1.55 Kg